Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies. More Information
If you would like more information please contact us using the details provided below:
Tel. 0121 313 5870
FAG Mounting Manager
Mounting instructions for rolling bearings with tapered bore
The FAG computer program Mounting Manager is a user-friendly aid for ensuring the correct mounting of bearings with tapered bore and offers the following options:
Calculation possibilities for mounting methods:
Bearings with a tapered bore are mounted either directly on the tapered shaft or journal, or by means of an adapter sleeve or withdrawal sleeve on the cylindrical shaft. The internal clearance is set either by conventional means using feeler gauges or by means of the axial displacement.
a) Mounting of bearings with tapered bore by measurement of the axial displacement
The bearing is placed in its starting position on the tapered bearing seat with a hydraulic nut. The required starting pressure defined for each individual bearing is set in the hydraulic nut by means of the digital manometer. The displacement as indicated in the table can be measured either by means of a depth gauge, slide gauge or a dial gauge. However, the final measurement of the radial internal clearance is always done by using a feeler gauge.
This mounting method:
b) Mounting of bearings with tapered bore by measurement of the reduction in radial internal clearance
When the bearing is pushed onto the tapered seat, the inner ring is expanded and the radial internal clearance is thereby reduced. This reduction in radial internal clearance is valid as a measure of the firm seating of the bearing. It is measured by means of a feeler gauge.